Spektrum SPM18000 DX18QQ User Manual download pdf (Page 36)

SPEKTRUM DX18QQ

Function List

Servo Setup

The Servo Setup menu contains the following functions:

• Travel Adjust

• Sub-Trim

• Reverse

• Speed

• Abs. (Absolute) Travel

• Balance

Travel Adjust

Travel Adjust sets the overall travel or

endpoints of the servo arm movement.

To adjust travel values:

1. Scroll to the channel you wish to

adjust and press the scroll wheel.

When adjusting travel values as-

signed to a control stick:

a. Center the control stick to adjust

both directions at the same time.

b. To adjust travel in one direction only, move the control stick in the direc-

tion you wish to adjust. Continue holding the control stick in the desired

direction while you are adjusting the travel value.

2. Scroll left or right to adjust the travel value. Press the scroll wheel to save the

selection.

Sub-Trim

Sub-Trim adjusts the servo travel center

point. If X-Plus is active, sub-trim for

X-Plus channels appears on the second

screen.

CAUTION Use only small sub-

trim values or you may cause

damage to the servo.

Reverse

Use the Reverse menu to reverse the

channel direction. For example, if the

elevator servo moves up and it should

move down.

To reverse a channel direction:

1. Scroll to Travel and press the scroll

wheel. Scroll left until Reverse

appears and press the scroll wheel again to save the selection.

2. Scroll to the channel you wish to reverse and press the scroll wheel.

CAUTION: If you reverse the Throttle channel, a conﬁ rmation screen

appears. Select YES to reverse the channel. A second screen appears, re-

minding you to bind your transmitter and receiver. Failure to re-bind the transmit-

ter and receiver will result in the throttle moving to full throttle if failsafe activates.

CAUTION: Always perform a control test after making adjustments to

conﬁ rm the model responds properly. After adjusting servos, always rebind

the transmitter and receiver to set the failsafe position.

Select this when X-Plus

channels are active

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 73 74

Comments to this Manuals

No comments

Spektrum SPM18000 DX18QQ User Manual Page 36

Comments to this Manuals

Related products and manuals for Control panel Spektrum SPM18000 DX18QQ