Spektrum SPM18000 DX18QQ User Manual Page 25
- Page / 74
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
25
www.spektrumrc.com
EN
Trim Setup
Use the Trim Setup screen to change
the size of the trim step and the trim
type.
Trim Step
Adjusting the trim step value determines
how many “clicks” of trim you input
each time you press the trim button.
Changing the trim step value to 0 disables the trim for the channel.
To change the trim step value:
1. Scroll to the trim step channel you wish to change.
2. Select the trim step value and scroll left or right to change the value.
3. Press the scroll wheel to save the selection.
Trim Type
The two Trim Type options are Common and F Mode.
Common trim type maintains the same trim values for all fl ight modes.
F Mode trim type enables you to save trim values for individual fl ight modes if
you fi nd, for example, the aircraft requires aileron trim in Flight Mode 1 but not in
Flight Mode 2.
Trim Assignment
In a few instances, you can reassign a trim to a different location.
Aircraft Model Type
Throttle
• Throttle Digital trim button (default)
• Left Analog lever
• Right Analog lever
Throttle trim type
• Common
• Flight Mode
• 3-Pos
Tip: With throttle trim set to 3-Pos, the throttle trim will function as a 3-position
throttle trim where the throttle trim can be set to low, middle, and high. This can
be helpful for turbine set up.
Helicopter Model Type
Throttle and Pitch Hover Trim —Used to trim the throttle and pitch setting for
precision hovering. This does not affect normal throttle trim operation.
• Right Knob
• Left Analog Lever
• Right Analog Lever
• L Trim
• R Trim
Active Gyro and Governor Trim— Used to trim the gyro and governor settings in
fl ight.
• L Trim
• R Trim.
Trim Location
Normal and Cross trim types are available. Normal trims align with the control
stick; for example, the throttle trim is next to the throttle stick.
Cross trims reverse the position of the trims; for example, the throttle trim is next
to the elevator stick and vice versa.
To change the Trim Position from Normal to Crossed, select Normal at the bottom
of the Trim Setup screen and press the scroll wheel.
IMPORTANT: Crossed trims will cross both sets of trims for both gimbals.
- Instruction Manual 1
- Bedienungsanleitung 1
- Manuel d’utilisation 1
- Manuale di Istruzioni 1
- SPEKTRUM DX18QQ 2
- Warranty Registration 4
- Box Contents 5
- Table of Contents 6
- Transmitter Batteries 8
- Transmitter Functions 10
- Function 11
- Main Screen 12
- Navigation 13
- Failsafe 15
- Hold Last Command 15
- Preset Failsafe 15
- SmartSafe 15
- Installation 16
- X-Plus Channels and Failsafe 18
- Installing the SD Card 19
- Model Type Programming Guide 20
- Common System Setup FunctIons 22
- Flight Mode Name Setup 23
- F-Mode Setup 23
- X-Plus Input Confi guration 24
- Channel Input Confi guration 24
- Channel Assignment 24
- Trim Setup 25
- Warnings 26
- Model Reset 26
- Model Copy 26
- Telemetry 27
- Frame Rate 28
- Prefl ight Setup 28
- Trainer 29
- System Settings 30
- Analog Switch Setup 30
- Extra Settings 32
- Serial Number 33
- Calibrate 33
- Transfer SD Card 34
- Function List 36
- D/R & Exponential 37
- Throttle Cut 38
- Throttle Curve 39
- Sequencer 41
- Range Test 42
- System Setup 43
- X-Plus Monitor 44
- ACRO (Airplane) 45
- Elevon Servo Control 46
- Flap System 47
- ACRO Mixing 47
- Acro Gyro Function 48
- Pitch Curve Function 48
- HELI (Helicopter) 49
- Swashplate 50
- Governor 51
- Tail Curve 51
- SAIL (Sailplane) 52
- Camber System 53
- SAIL Mixing 53
- Receiver Installation 54
- And Power System Requirements 54
- Specifi cations 55
- Battery Requirements 55
- Plugging in the Servos 58
- Failsafe Functions 59
- QuickConnect 60
- with Brownout Detection 60
- Storing Your System 60
- Transmitter Mode Conversion 61
- Adjust Stick Tension 62
- 2.4Ghz Troubleshooting Guide 64
- Parts list 65
- FCC Information 68
- FAA Information 69
- 1-Year LIMITED WARRANTY 70
- Parts Contact Information 72
- Declaration of Conformity 73
Related products and manuals for Control panel Spektrum SPM18000 DX18QQ
(72 pages)
(72 pages)
(47 pages)
(45 pages)
Control panel Spektrum DX7 User Manual
(108 pages)
(108 pages)
© 2020, manymanuals.com. All rights reserved. | 3.136 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals