Spektrum SPM18000 DX18QQ User Manual Page 33
- Page / 74
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
33
www.spektrumrc.com
EN
Serial Number
The Serial Number screen displays the
transmitter serial number and AirWare
software version.
Reference the Serial Number screen
any time you need to register your
transmitter or update the AirWare
software from the Spektrum Community
website.
Exporting the Serial Number to the SD Card
You may fi nd it helpful to export the transmitter serial number to a text fi le for your
personal records or when you are registering the transmitter on the Spektrum
Community.
To export the transmitter serial number:
1. Insert an SD Card in the card slot on the transmitter.
2. Scroll to EXPORT and press the scroll wheel. The SD Status screen appears
and should display MY_DX18QQ.xml in the middle of the screen.
3. Press the scroll wheel again to return to the Serial Number screen.
4. Power off the transmitter and remove the SD Card from the transmitter.
5. Install the SD Card in a card reader connected to your computer.
6. Open the MY_DX18QQ.xml fi le from the SD Card location. You can then copy
and paste the serial number into your personal records or to the Spektrum
Community website.
Locating the Transmitter AirWare Software Version
The transmitter AirWare software version appears between PREV and NEXT at
the bottom of the Serial Number screen. Register your DX18QQ to get AirWare
software updates and other news at community.SpektrumRC.com
IMPORTANT: AirWare fi les are specifi c to the transmitter serial number and you
cannot transfer AirWare fi les between transmitters, ie., downloading an AirWare
software update once and attempting to install it on multiple transmitters.
Calibrate
The Calibration screen stores the
potentiometer endpoints for all
proportional controls. It is mandatory to
complete the calibration after changing
the stick mode selection.
Calibrating the Transmitter
1. Carefully move the gimbal sticks in a + shape moving from left to right, then
up and down. Press gently on the gimbals at the stops to achieve an accurate
calibration. Return both gimbal sticks to the center position.
2. Move the Left and Right Side Levers to the top and bottom positions, then
move the side levers to the center position.
IMPORTANT: Only move one side lever at a time during calibration.
3. Move the Knob to the full clockwise and counter-clockwise positions, then
return the Knob to the center position.
4. Select SAVE to store the calibration.
- Instruction Manual 1
- Bedienungsanleitung 1
- Manuel d’utilisation 1
- Manuale di Istruzioni 1
- SPEKTRUM DX18QQ 2
- Warranty Registration 4
- Box Contents 5
- Table of Contents 6
- Transmitter Batteries 8
- Transmitter Functions 10
- Function 11
- Main Screen 12
- Navigation 13
- Failsafe 15
- Hold Last Command 15
- Preset Failsafe 15
- SmartSafe 15
- Installation 16
- X-Plus Channels and Failsafe 18
- Installing the SD Card 19
- Model Type Programming Guide 20
- Common System Setup FunctIons 22
- Flight Mode Name Setup 23
- F-Mode Setup 23
- X-Plus Input Confi guration 24
- Channel Input Confi guration 24
- Channel Assignment 24
- Trim Setup 25
- Warnings 26
- Model Reset 26
- Model Copy 26
- Telemetry 27
- Frame Rate 28
- Prefl ight Setup 28
- Trainer 29
- System Settings 30
- Analog Switch Setup 30
- Extra Settings 32
- Serial Number 33
- Calibrate 33
- Transfer SD Card 34
- Function List 36
- D/R & Exponential 37
- Throttle Cut 38
- Throttle Curve 39
- Sequencer 41
- Range Test 42
- System Setup 43
- X-Plus Monitor 44
- ACRO (Airplane) 45
- Elevon Servo Control 46
- Flap System 47
- ACRO Mixing 47
- Acro Gyro Function 48
- Pitch Curve Function 48
- HELI (Helicopter) 49
- Swashplate 50
- Governor 51
- Tail Curve 51
- SAIL (Sailplane) 52
- Camber System 53
- SAIL Mixing 53
- Receiver Installation 54
- And Power System Requirements 54
- Specifi cations 55
- Battery Requirements 55
- Plugging in the Servos 58
- Failsafe Functions 59
- QuickConnect 60
- with Brownout Detection 60
- Storing Your System 60
- Transmitter Mode Conversion 61
- Adjust Stick Tension 62
- 2.4Ghz Troubleshooting Guide 64
- Parts list 65
- FCC Information 68
- FAA Information 69
- 1-Year LIMITED WARRANTY 70
- Parts Contact Information 72
- Declaration of Conformity 73
Related products and manuals for Control panel Spektrum SPM18000 DX18QQ
(72 pages)
(72 pages)
(47 pages)
(45 pages)
Control panel Spektrum DX7 User Manual
(108 pages)
(108 pages)
© 2020, manymanuals.com. All rights reserved. | 0.392 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals