Spektrum SPM18000 DX18QQ User Manual download pdf (Page 18)

SPEKTRUM DX18QQ

X-Plus Channels and Failsafe

Failsafe is not supported for servos connected to the X-Plus Module. We recom-

mend that no failsafe should be expected or attempted for a servo connected

through the X-Plus Module. However, servos connected to the X-Plus Module will

hold last command in the event of a failsafe condition.

To Activate X-Plus

1. Open the Frame Rate Menu in

System Setup.

2. Scrolll to X-Plus and press the

scroll wheel to activate. The X-Plus

Inputs screen is now active in the

Channel Assign menu.

AUX6 and AUX7 channels are available on 12-channel receivers when X-Plus is

active. AUX6 and AUX7 are 2048 resolution and 22ms frame rate (12-channel

receivers only).

Channels X+1 and X+2 are duplicate

channels of channels 11 and 12 on a

12-channel receiver with X-Plus active.

If channels 11 and 12 require any

adjustment for travel adjust, servo

reversing, sub trim or any other function,

adjust channels X+1 and X+2.

Note that channels 11 and 12 will

also show on the X-Plus monitor as

channels X+1 and X+2.

If you select 11ms frame rate before you activate X-Plus, the transmitter reverts

to 22ms frame rate when X-Plus is active.

CAUTION:

Do NOT connect throttle or any primary control surface to the

X-Plus Module. The X-Plus channels are intended to be used for auxiliary

functions only. X-Plus channels have a resolution of 512 and variable latency from

22ms to about 88ms. When X-Plus is active, the ﬁ rst 10 channels default to 22ms.

Refer to community.spektrumrc.com for more information about X-Plus options.

from Channel Assign menu

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 73 74

No comments

Spektrum SPM18000 DX18QQ User Manual Page 18