Spektrum SPM18000 DX18QQ User Manual Page 29
- Page / 74
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
29
www.spektrumrc.com
EN
Trainer
The DX18QQ features a programmable trainer function with 4
trainer modes. The transmitter assigns the trainer function to Switch I. The 4
trainer modes include:
Inhibit
In Inhibit, the slave transmitter must
have the same programming as the
master transmitter (e.g., servo revers-
ing, travel adjust, sub-trim, trims).
Programmable
Programmable mode enables you to
program the master transmitter to
transfer any or all individual channels
when you activate the trainer switch.
This mode is ideal for beginners learn-
ing to control individual channels while
the master transmitter maintains control of all other channels.
The slave transmitter should be in Pilot Link Slave mode, if available. It is not
necessary to have model programming in the slave transmitter.
Pilot Link Master
When Pilot Link Master is active, the
slave transmitter controls the primary
stick functions (Throttle, aileron, elevator
and rudder) while the master maintains
control of all other channels and func-
tions (including dual rates and auxillary
switch positions). Pilot Link Master is ideal for complex models, as the master
transmitter maintains control of all secondary functions—for example fi lght
modes, retracts, fl aps and brakes.
Slave
Use Slave mode when using the
DX18QQ as a slave transmitter and Pilot
Link is active in the master transmitter.
DX18QQ Trainer Operation
1. Bind the master transmitter to the model.
2. Connect the trainer cord (SPM6805) to the back of the master transmitter.
3. Make sure the master and slave transmitter battery packs are fully charged.
4. Make sure the slave transmitter is powered off. The slave transmitter receives
power when you connect the trainer cord.
5. Connect the trainer cord to the slave transmitter.
6. The slave transmitter screen displays information but does not send a signal
to the model.
7. Press the trainer button on the master transmitter to transfer model control
from the master to the slave.
8. Release the trainer button and the master transmitter regains control of the
model.
- Instruction Manual 1
- Bedienungsanleitung 1
- Manuel d’utilisation 1
- Manuale di Istruzioni 1
- SPEKTRUM DX18QQ 2
- Warranty Registration 4
- Box Contents 5
- Table of Contents 6
- Transmitter Batteries 8
- Transmitter Functions 10
- Function 11
- Main Screen 12
- Navigation 13
- Failsafe 15
- Hold Last Command 15
- Preset Failsafe 15
- SmartSafe 15
- Installation 16
- X-Plus Channels and Failsafe 18
- Installing the SD Card 19
- Model Type Programming Guide 20
- Common System Setup FunctIons 22
- Flight Mode Name Setup 23
- F-Mode Setup 23
- X-Plus Input Confi guration 24
- Channel Input Confi guration 24
- Channel Assignment 24
- Trim Setup 25
- Warnings 26
- Model Reset 26
- Model Copy 26
- Telemetry 27
- Frame Rate 28
- Prefl ight Setup 28
- Trainer 29
- System Settings 30
- Analog Switch Setup 30
- Extra Settings 32
- Serial Number 33
- Calibrate 33
- Transfer SD Card 34
- Function List 36
- D/R & Exponential 37
- Throttle Cut 38
- Throttle Curve 39
- Sequencer 41
- Range Test 42
- System Setup 43
- X-Plus Monitor 44
- ACRO (Airplane) 45
- Elevon Servo Control 46
- Flap System 47
- ACRO Mixing 47
- Acro Gyro Function 48
- Pitch Curve Function 48
- HELI (Helicopter) 49
- Swashplate 50
- Governor 51
- Tail Curve 51
- SAIL (Sailplane) 52
- Camber System 53
- SAIL Mixing 53
- Receiver Installation 54
- And Power System Requirements 54
- Specifi cations 55
- Battery Requirements 55
- Plugging in the Servos 58
- Failsafe Functions 59
- QuickConnect 60
- with Brownout Detection 60
- Storing Your System 60
- Transmitter Mode Conversion 61
- Adjust Stick Tension 62
- 2.4Ghz Troubleshooting Guide 64
- Parts list 65
- FCC Information 68
- FAA Information 69
- 1-Year LIMITED WARRANTY 70
- Parts Contact Information 72
- Declaration of Conformity 73
Related products and manuals for Control panel Spektrum SPM18000 DX18QQ
(72 pages)
(72 pages)
(47 pages)
(45 pages)
Control panel Spektrum DX7 User Manual
(108 pages)
(108 pages)
© 2020, manymanuals.com. All rights reserved. | 0.531 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals