Spektrum SPM18000 DX18QQ User Manual download pdf (Page 40)

SPEKTRUM DX18QQ

Assigning a Mix to a Switch

If you wish to assign a mix to a switch

position:

1. Scroll to Switch and press the scroll

wheel.

2. Scroll left or right to the switch you

wish to use and press the scroll

wheel to save the selection.

3. Scroll to the switch position where you want the mix to be active.

The mix is Active when the box is ﬁ lled and Inactive when the box is open. You

can assign a mix to be active in multiple switch positions (0,1 or 2).

CAUTION: Always do a Control Test of your model after changing mixes.

Combo Mixing

Combination Mixing is available to

create OR mixing. OR mixing allows you

to assign 2 conditions where the mix

will activate if either condition occurs.

You can also create AND mixing where

2 conditions must occur to activate the

mix.

To program Combination Mixing:

1. Activate a mix.

2. Select Combo Sw. in the Switch Selection. The Combo screen appears.

3. Select the desired switch and active switch position for Switch 1.The mix is

Active when the switch position box is ﬁ lled.

4. Select the Relation (AND, OR)

5. Select the desired switch and active switch position for Switch 2.The mix is

Active when the switch position box is ﬁ lled.

6. Press the BACK button to save the Combination Mix.

The Master (left side) names are inputs. For example, “Aileron” refers to the

Aileron Stick. The Slave (right side) name is the name of the channel receiving the

mix command when the Master channel

moves.

Back Mixing

Back Mixing applies a mix to all related

servos in a wing or tail type. For ex-

ample, if you select 2 AIL, 2 FLAP in the

Aircraft Type screen, a mix to one aileron

channel affects both aileron servos.

The mix response, however, depends on the aileron channel included in the mix.

A Back Mix also enables you to use fewer mixes to achieve the desired response,

for example adding roll to a split elevator.

1/2 Mixing Values

When adjusting the mix values near center (below 10), 1/2% mix values are

available for ﬁ ne adjustment capability.

IMPORTANT: This function is only available in program mixes and rudder to

aileron/elevator in aircraft model type.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 73 74

Comments to this Manuals

No comments

Spektrum SPM18000 DX18QQ User Manual Page 40

Comments to this Manuals

Related products and manuals for Control panel Spektrum SPM18000 DX18QQ