Spektrum SPM18000 DX18QQ User Manual download pdf (Page 34)

SPEKTRUM DX18QQ

Transfer SD Card

Import Model

To import an individual model ﬁ le

from the SD Card:

1. Save the model ﬁ le to the SD Card.

2. Select the Model List location where

you wish to import the new model

ﬁ le.

3. In the SD Card menu, scroll to Select Option and press the scroll button once.

4. Scroll to Import Model and press the scroll button again to save the selection.

The Select File screen appears.

5. Select the model ﬁ le you wish to import. The Overwrite screen appears.

IMPORTANT: When you select Import, the transmitter leaves the System

Setup List.

6. Select the model that you would like to import the model to.

7. Select Import to conﬁ rm overwriting the current model ﬁ le. The transmitter

activates the new model ﬁ le and the Main Screen appears.

NOTICE: A Preﬂ ight Checklist may appear prior to the Main Screen if the checklist

was active during the model ﬁ le export. Select MAIN to exit the Preﬂ ight Checklist.

See “Preﬂ ight Setup” for more information.

Import All Models

To import all models from the SD Card:

1. Select Import All Models

2. Conﬁ rm by selecting IMPORT.

NOTICE: This function overwrites the model memories. Ensure that the models

currently in your transmitter are saved on an SD card separate from the

transmitter before performing this function.

You can import a model to any location you want. If you prefer to use Import All,

you can use your PC to rename the SPM ﬁ le. The ﬁ rst two digits (01 to 50) are

the destination model number. Your SD card can only contain 50 models. Save

ﬁ les to folders on the card then remove from the card all unused models. Files are

selected by their position in the directory table.

Export Model

You can use the Export Model option

to export a single model ﬁ le to the SD

Card.

1. Make sure the active model ﬁ le is

the one you wish to Export.

2. Scroll to Select Option and press the

scroll button once.

3. Scroll to Export Model and press the

scroll button again to save the selection. The Export to SD screen appears.

The ﬁ rst two characters of the ﬁ le name correspond to the Model List number

(01, for example).

4. (Optional) If you wish to rename the model ﬁ le before exporting it to the SD

Card:

a. Scroll to “Save to:” and press the scroll wheel. The File Name screen

appears.

b. Assign a new ﬁ le name. The ﬁ le name can contain up to 25 characters

including the .SPM ﬁ le extension.

c. When you are done assigning the new ﬁ le name, press the Back button to

return to the Export to SD screen.

5. Select Export to save the ﬁ le to the SD Card. When the export is complete, the

transmitter returns to the SD Card Menu screen.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 73 74

Comments to this Manuals

No comments

Spektrum SPM18000 DX18QQ User Manual Page 34

Comments to this Manuals

Related products and manuals for Control panel Spektrum SPM18000 DX18QQ