Spektrum SPM18000 DX18QQ User Manual download pdf (Page 16)

SPEKTRUM DX18QQ

X-Plus

The X-Plus 8 module is designed to allow expansion of up to 8 servos for non-

control surface functions such as bomb drops, lights, winches, retractable landing

gear, and many more. The X-Plus 8 is compatible with Spektrum™ X-Plus trans-

mitters and receivers. The X-Plus 8 module offers the option to power the con-

nected servos via dual auxiliary battery ports with separate batteries and switch

harnesses (sold separately) independent of the receiver. The X-Plus 8 module can

also be powered inclusive of the receiver by using the included jumper through

either of the dual BATT/JMPR ports.

Features:

• 8-channel expansion

• Dual battery ports

• Included Jumper offers option of using receiver power

• Allows ﬁ ne tuning of 8 servos on non-critical controls (bomb drops, lights,

winches, gear, etc.)

Applications

Scale modelers with complex aircraft, ships, or surface applications will enjoy the

easy programming and functions of the X-Plus 8 module using X-Plus compatible

transmitters AirWare™ software. Modelers will be able to select 2 position,

3 position or potentiometer adjustment through their transmitter. After selecting

the speciﬁ c switch or port, AirWare software will allow the individual servo adjust-

ment of each X-Plus channel‘s travel adjust, sub trim, reversing, and speed.

Speciﬁ cations

Type: X-Plus Module

Channels: 8

Dimensions: 0.91x 1.61 x 0.79 in

(23 x 41 x 20mm)

Weight: .42 oz (11.9 g)

Voltage Range: 3.5 to 9.6V

Resolution: 512

Compatibility: All X-Plus transmitters

and receivers

X+1

X+5

X+6

X+2

X+3

X+4

X+7

X+8

BATT/JMPR

SRXL

Installation

In gas and glow aircraft, install the X-Plus 8 module by wrapping it in protective

foam and fastening it in place using rubber bands or a hook and loop strap. In

electric airplanes or helicopters, you can use thick double-sided foam tape to

fasten the module in place.

When using an X-Plus receiver and module, it is recommended that the X-Plus 8

module be mounted as near to the receiver as possible. When using the jumper

lead to power the module, mounting the X-Plus 8 module near the receiver

system will minimize the current loss from the receiver. Servo extensions can be

used with each servo, but we recommend using heavy 22 gauge wire with gold-

plated connectors.

A power jumper plug must be installed in one of the BATT/JMPR ports of the

module if the module is powered from the receiver through the SRXL port.

Always remove the power jumper when an auxiliary battery or auxiliary batteries

are used. When the auxiliary battery option is used, the X-Plus 8 module can be

mounted as far away from the receiver as needed to be near connected servos.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 73 74

Comments to this Manuals

No comments

Spektrum SPM18000 DX18QQ User Manual Page 16

Comments to this Manuals

Related products and manuals for Control panel Spektrum SPM18000 DX18QQ