Spektrum SPM18000 DX18QQ User Manual download pdf (Page 52)

SPEKTRUM DX18QQ

Sailplane Type

NOTICE: Refer to your sailplane manual for recommended

control throws.

CAUTION: Always do a Control Test of your model with the transmitter

after programming to make sure your model responds as desired.

Use the Sailplane Type Screen to select

wing and tail types to match your

sailplane model. Diagrams and setup

names show on the transmitter screen to

show the available setups.

Refer to community.spektrumrc.com for more information about

new DX18QQ AirWare updates to support these options.

*Selection of multiple ailerons activates the Differential menu option.

**Selection of either of these activates the V-Tail Differential menu option.

Camber Preset

Camber Preset is only available when

2 or 4 aileron wing type is selected

in Sailplane Type. The Camber Preset

function enables you to program the

ailerons, ﬂ aps, wing tips and elevator for

a speciﬁ c position in each Flight Mode.

If ﬂ ight modes are not active, only one

preset position is available and it is always active.

The Camber Preset Speed enables the control surfaces to transition over a period

of time, up to 30 seconds, when you change ﬂ ight modes.

Move the ﬂ ight mode switch to the desired position to change the

Camber Preset values.

SAIL (Sailplane)

Wing

• 1 Servo

• 2 Aileron*

• 2 Aileron 1 Flap*

• 2 Aileron 2 Flap*

• 4 Aileron 2 Flap*

Tail

• Normal

• V-Tail A**

• V-Tail B**

Motor

• Inhibit

• Assign to a Switch (optional)

Image Selection

Press NEXT to select the sailplane im-

age. Highlight and select the image on

screen, then use the roller to select the

image desired. Press the roller to select.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 73 74

Comments to this Manuals

No comments

Spektrum SPM18000 DX18QQ User Manual Page 52

Comments to this Manuals

Related products and manuals for Control panel Spektrum SPM18000 DX18QQ