Spektrum SPM6700 Instruction Manual download pdf (Page 28)

28 SPEKTRUM DX6 • TRANSMITTER INSTRUCTION MANUAL

Press



• Travel Adjust • Sub-Trim • Reverse

FUNCTION LIST

SERVO SETUP

The Servo Setup menu contains the following functions:

The Main Screen appears when you power on the transmitter. Press the scroll wheel once to display the Function List.



Travel Adjust

Travel Adjust sets the overall travel or endpoints of the servo arm

movement.

To adjust travel values:

1. Scroll to the channel you wish to adjust and press the scroll

wheel. When adjusting travel values assigned to a control

stick:

a. Center the control stick to adjust both directions at the

same time.

b. To adjust travel in one direction only, move the control

stick in the direction you wish to adjust. Continue

holding the control stick in the desired direction while

you are adjusting the travel value.

2. Scroll left or right to adjust the travel value. Press the scroll

wheel to save the selection.

Sub-Trim

Sub-Trim adjusts the servo travel center point.

CAUTION Use only small sub-trim values or you may

cause damage to the servo.

Reverse

Use the Reverse menu to reverse the channel direction. For

example,iftheelevatorservomovesupanditshouldmovedown.

To reverse a channel direction:

1. Scroll to Travel and press the scroll wheel. Scroll left until

Reverse appears and press the scroll wheel again to save the

selection.

2. Scroll to the channel you wish to reverse and press the scroll

wheel.

If you reverse the Throttle channel, a conﬁrmation screen appears.

Select YES to reverse the channel. A second screen appears,

reminding you to bind your transmitter and receiver.

CAUTION: Always rebind the transmitter and receiver

after reversing the Throttle channel. Failure to do so

will result in the throttle moving to full throttle if failsafe

activates.

Always perform a control test after making adjustments to conﬁrm

the model responds properly.

CAUTION: After adjusting servos, always rebind the

transmitter and receiver to set the failsafe position.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 47 48

Comments to this Manuals

No comments

Spektrum SPM6700 Instruction Manual Page 28

Comments to this Manuals

Related products and manuals for Toy parts Spektrum SPM6700