Spektrum SPM6700 Instruction Manual download pdf (Page 20)

20 SPEKTRUM DX6 • TRANSMITTER INSTRUCTION MANUAL



Telemetry Alarms

SelectInhunderAlarmtoselectthetypeofalarmdesired.Options

include Inh, Tone, Voice.

Status Reports (Spoken Telemetry)

1.SelectInhnexttoStatusReportsineachtelemetry

setting to add spoken telemetry feedback as desired.

2. Scroll to select how often you want to hear the status

report.

Warning Reports (Spoken Telemetry)

1.SelectInhnexttoWarningReportsineachtelemetry

setting to add spoken telemetry feedback for telemetry warn-

ings as desired.

2. Scroll to select how often you want to hear the telemetry

warning.

File Settings

This is used to select the data logging settings.

File Name

1. Select File Name to assign a custom ﬁle name.

2. The File Name screen appears, allowing you to name the ﬁle

as you would for a Model Name or Flight Mode Name. The ﬁle

namecanincludeamaximumof8characters.

3. Press BACK to save the name.

Start

1. Select Start to assign a speciﬁc switch position or stick

position that activates Data Logging.

2. Press the scroll wheel once to save the selection.

Enabled

WhenEnabledissettoNO,DataLoggingisturnedoff.

Select YES to save Telemetry data to the SD Card. The SD Card

must be installed in the transmitter to select YES.

CAUTION: If you access the Telemetry menu from the

Function List, you may see a Frame Loss appear when you

exitthemenu.TheFrameLossisnotanerror,buttherewillbea

momentarylossofradiosignalwhenexitingtheTelemetryscreen.

DO NOT access the Telemetry menu during ﬂight.

Preﬂight Setup

The Preﬂight Setup menu option enables you to program a pre-ﬂight

checklist that appears each time you power on the transmitter or

when you select a new model memory. Each item on the list must

be conﬁrmed before you can access the Main Screen.

Frame Rate

The Frame Rate menu enables you to change the frame rate and

modulation mode. Select the option you wish to change and press

the scroll wheel.

You must use digital servos if you select 11ms frame rate. Analog

and digital servos can be used with a 22ms frame rate.

Modulation Mode

We recommend using DSMX

(default) modulation mode. When

DSMX is active, the transmitter operates in DSMX with DSMX

receivers and DSM2 with DSM2 receivers. The transmitter

automatically detects DSM2 or DSMX during binding and changes

the mode accordingly to match the receiver type you are using.

If you select DSM2, the transmitter operates in DSM2 regardless

of whether it is bound to a DSM2 or DSMX receiver.

NOTICE: While DSMX allows you to use more than 40

transmitters simultaneously, do not use more than 40 transmitters

simultaneously when using a DSM2 receiver or a transmitter in

DSM2 mode.

Bind

The Bind menu enables you to bind a transmitter and receiver

without powering off the transmitter. This menu is helpful if you

are programming a model and need to bind the receiver for

failsafe positions.

See “Programming Failsafe Positions” for more information.

SYSTEM SETUP

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 47 48

Comments to this Manuals

No comments

Spektrum SPM6700 Instruction Manual Page 20

Comments to this Manuals

Related products and manuals for Toy parts Spektrum SPM6700