Spektrum SPM6700 Instruction Manual download pdf (Page 10)

10 SPEKTRUM DX6 • TRANSMITTER INSTRUCTION MANUAL

EN





BINDING

Binding is the process of programming the receiver to recognize the GUID (Globally Unique Identiﬁer) code of a single speciﬁc transmitter.

You must bind the AR610 receiver to your transmitter before it will operate.

Binding Using the Receiver and Receiver Battery

Binding Using the Receiver and ESC

C

D

F

C

D

F

CLEAR

BACK

3 MODEL TYPES Wirel ess Trainer VOICE ALERTS

6-CHANNEL DSMX® TEL EMETRY SYSTEM

CLEAR

BACK

3 MODEL TYPES Wirel ess Trainer VOICE ALERTS

6-CHANNEL DSMX® TEL EMETRY SYSTEM

C

D

F

C

D

F

CLEAR

BACK

3 MODEL TYPES Wirel ess Trainer VOICE ALERTS

6-CHANNEL DSMX® TEL EMETRY SYSTEM

CLEAR

BACK

3 MODEL TYPES Wirel ess Trainer VOICE ALERTS

6-CHANNEL DSMX® TEL EMETRY SYSTEM

C

D

F

C

D

F

CLEAR

BACK

3 MODEL TYPES Wirel ess Trainer VOICE ALERTS

6-CHANNEL DSMX® TEL EMETRY SYSTEM

CLEAR

BACK

3 MODEL TYPES Wirel ess Trainer VOICE ALERTS

6-CHANNEL DSMX® TEL EMETRY SYSTEM

C

D

F

C

D

F

CLEAR

BACK

3 MODEL TYPES Wirel ess Trainer VOICE ALERTS

6-CHANNEL DSMX® TEL EMETRY SYSTEM

CLEAR

BACK

3 MODEL TYPES Wirel ess Trainer VOICE ALERTS

6-CHANNEL DSMX® TEL EMETRY SYSTEM

1. Lower throttle to the lowest position and make sure the

transmitter is powered off.

2. Insert the bind plug into the BIND/DATA port.

3. Insert the receiver battery into ANY open port. The receiver’s

LED will ﬂash when the receiver is ready to bind.

4. While pressing the Bind button, power on the

transmitter.

5. Release the Bind button after the receiver has stopped

ﬂashing rapidly, once the receiver’s LED stays illuminated; this

indicates the receiver is bound to the transmitter. The screen

also provides binding information.

6. Remove the bind plug from the receiver.

1. Lower the throttle to the lowest position and make sure the

transmitter is powered off.

2. Insert the bind plug into the BIND/DATA port.

3.InserttheESCplugintotheTHROport.

4. Connect the battery to ESC and turn on the ESC switch,

if available. The receiver’s LED will ﬂash rapidly when the

receiver is ready to bind.

5. While pressing the Bind button, power on the

transmitter.

6. Release the Bind button after the receiver’s LED stays illumi-

nated. This indicates the receiver is bound to the transmitter.

The transmitter screen also provides binding information.

7. Remove the bind plug from the receiver.

1

1

4

5

2

2

5

6

3

3 4

6

7

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 47 48

Comments to this Manuals

No comments