Spektrum SPM6700 Instruction Manual download pdf (Page 22)

22 SPEKTRUM DX6 • TRANSMITTER INSTRUCTION MANUAL



Wireless Trainer

Wireless Trainer works just like the Wired Trainer, without the

wire. Select Wireless Trainer to bind a DSM2 or DSMX slave

transmitter to the master transmitter. With this option, when the

master presses the trainer button or switch, control is given to

the currently bound slave transmitter. After binding, the slave

transmitter will remain bound to the master transmitter until

a different transmitter is bound to the master, or the slave

transmitter is bound to another receiver or a wireless master

transmitter. ModelMatch™ technology applies to the wireless

trainer system; the master transmitter will be bound to the

slave in the bound model used. Also, if the slave transmitter

has ModelMatch technology, it will only be bound to the master

transmitter in the selected model during binding.

Inhibit

In Inhibit, the wireless trainer function will be inhibited and will not

function.

CAUTION: Select Inhibit in the Trainer menu when you aren’t

using the wireless trainer function. Failure to select Inhibit may

result in loss of control of the aircraft.

Programmable Master

Programmable mode enables you to program the master

transmitter to transfer any or all individual channels when you

activate the trainer switch. This mode is ideal for beginners

learning to control individual channels while the master transmitter

maintains control of all other channels. The slave transmitter

should be in Inhibit mode, if available. The Master and Slave

transmitters MUST have the same programming.

Pilot Link Master

Pilot Link Master enables you to program the master transmitter

to transfer any or all individual channels when you activate the

trainerswitch.PilotLinkMasterisidealforcomplexmodels,

as the master transmitter maintains control of all secondary

functions, such as ﬂight modes, retracts, ﬂaps and brakes.

Secondary functions can be individually assigned to the Slave

transmitter as necessary. It is not necessary to have model

programming in the slave transmitter.

DX6 Wireless Trainer Operation

1. Enter an unused model on the slave transmitter (computer

transmitter only).

2. Bind the master transmitter to the model.

3. Make sure the master and slave transmitter battery packs are

fully charged.

4. Make sure the slave transmitter is powered off.

5. Either in the Wireless Programmable Master setup page or the

Wireless Pilot Link Master setup page, select BIND. This will

put the master transmitter’s wireless trainer receiver into bind

mode. You should see the following screen:

6. Enter bind mode on the slave transmitter following the

instructions provided with that transmitter.

7. After a successful bind, the following screen should appear.

8. Press the trainer button on the master transmitter to transfer

model control from the master to the slave.

9. Release the trainer button and the master transmitter regains

control of the model.

Master Override

TheMasterOverridefeatureenablestheinstructortoimmediately

regain control of the model by moving the control sticks. After you

activateMasterOverride,theslavetransmittercannotcontrolthe

model until you reset the trainer switch. To reset the trainer switch:

1.MovethetrainerswitchtotheOFFposition.

2.MovethetrainerswitchtotheONpositiontoactivatetheslave

transmitter.

SYSTEM SETUP

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 47 48

Comments to this Manuals

No comments

Spektrum SPM6700 Instruction Manual Page 22

Comments to this Manuals

Related products and manuals for Toy parts Spektrum SPM6700