Spektrum SPM20200 DX2.0 User Manual download pdf (Page 19)

steering and throttle servos to be increased or decreased in each direction to achieve the

exact servo movement needed. The End-Point Adjustment range is from 0% to 125% and

is factory set to 100% for both channels. The value displayed on the screen depends on

the current position of the steering wheel, trigger, or trim lever to be adjusted. This feature

is very useful either to maximize servo travel or to reduce servo over-travel to eliminate

servo binding (servo moves further than control mechanism allows), without the need for

mechanical linkage adjustment. The screens below are accessed by turning the wheel to

the desired direction to be adjusted (left or right), by moving the trigger to the forward or

backward (brake) position, or by moving the Grip Lever A to the forward or back positions.

Accessing the End-Point Adjustment Function

1. Turn on the transmitter power switch

2. Press the SCROLL key to enter Function mode.

3. Press the SCROLL key until “EPA” appears in small letters on the left side of the screen.

4. Press the CHANNEL key to select the desired channel to be adjusted.

Steering = ST R/B (steering right) or ST L/F (steering left)

Throttle = TH L/F (forward) or TH R/B (braking or reverse)

5. Move the steering wheel or trigger in the desired direction for adjustment (left/right,

forward/reverse or brake). Press the INCREASE or DECREASE keys to achieve the

desired amount of travel. Move the wheel or trigger in the opposite direction to adjust

the travel in the opposite direction.

6. Press the SCROLL key to access the Sub-Trim Function.

7. To exit the Function Mode, either turn the transmitter power switch off or press the

SCROLL and CHANNEL keys at the same time.

Note: When setting the end-point adjustment values for the steering function, it is suggested

that, if possible, the maximum travel values be set to an equal value in both directions to

maintain proper steering control.

End-Point

Adjustment

(Function Mode)

L/F

I00

–

I00

E P A

Current Value

Values: 0 to 125

Clear = 100

L/F

Steering Left

End-Point Adj

Current Value

Values: 0 to 125

Clear = 100

Forward Throttle

End-Point Adj

R/B

I00

–

I00

E P A

Current Value

Values: 0 to 125

Clear = 100

R/B

Steering Right

End-Point Adj

Current Value

Values: 0 to 125

Clear = 100

Backward Throttle

(Brake)

End-Point Adj

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 31 32

Comments to this Manuals

No comments

Spektrum SPM20200 DX2.0 User Manual Page 19

Comments to this Manuals

Related products and manuals for Control panel Spektrum SPM20200 DX2.0