Spektrum DX6i User Manual download pdf (Page 30)





When the battery voltage drop below 4.3 volts an alarm will sound and the screen will ﬂash.



The DX6i offers a Trainer function that allows the transmitter to operate as a master or slave. The trainer switch is

located on the back left of the transmitter. (The trainer switch is located on the back right on Mode 1 transmitters.)

MASTER

The transmitter can be used as a master but the slave transmitter must have the same programming (i.e. reverse,

travel adjust, dual rates, mixes, sub trims, etc.) as the master.



When using the transmitter as a slave with another DX6i, it’s necessary to match all the programmable settings (i.e.

reverse, travel adjust, etc.).



The roller is used to access all programming functions.

• Pressing and releasing the roller accesses/ enters the selected function

• Rolling the roller changes values or selections



Anytime the transmitter is turned on, the main screen will appear.

Reduce photo to 13.5%

MUSTANG

5.0V

MDL6

DN06:00



From the ADJUST LIST or SETUP LIST screens, pressing and holding the roller for more than three seconds then

releasing the roller will return the display to the main screen.



From the any program function screens, pressing and holding the roller for more than three seconds then releasing

the roller will return the display to the LIST of SETUP screen.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 139 140

No comments

Spektrum DX6i User Manual Page 30