Spektrum SPM1200 User Manual download pdf (Page 12)

In the unlikely event that the link is lost during use, the receiver will drive the servos to

their fail-safe positions that were preset during the binding process. If the receiver is

turned on prior to turning on the transmitter, the receiver will enter the fail-safe mode

driving the servos to their preset fail-safe position. When the transmitter is turned on,

normal control is resumed.

Note: The fail-safe positions can be checked by turning the power

off on the transmitter. The green LED on the reveiver will go out and

the servo/ESC will be driven to their stored fail-safe positions.

Loss of Link / Fail Safe

1 2 ... 7 8 9 10 11 12 13 14 15 16

No comments

Spektrum SPM1200 User Manual Page 12